M-150S Current Calibrator
Current calibrator M-150S generates very stable DC and AC current in range 9A
–105 A. Output value of current can be set with 4 1/2 resolution. Frequency covers range
from 40 Hz to 120 Hz on 6 fix values. M-150S has very good long life stability of
amplitude and frequency and has low distortion.
Current calibrator is suitable for calibration of digital and analogue ampermeters. With
option 150-10 can be used for calibration of clamp ampermeters up to 1000 A. Calibrator
can be supplied from external input.
To control calibrator is possible in local mode via front panel keyboard or in remote mode
via interface bus GPIB.
Mode
|
Range |
Accuracy [ % ] |
| AC/DC current |
9 - 105 A |
0.2 |
| Frequency |
DC, 40, 50, 60, 80, 100, 120 Hz |
0.01 |
| Max. voltage on load |
1 V rms |
- |
Accessories
| Option 150-01 |
Cable set ( 2x100A, 0.5m) |
| Option 150-10 |
Current coil x10 for calibrating clamp A-meters |
| RPV 1 µOhm |
Resistance standard 1 mOhm/100 A |
| IEEE488/IEC625 |
GPIB cable 2m |
|
|
Indietro
